|
|
Post by aaronj on Nov 22, 2012 13:39:34 GMT -5
picked it up for a good price. but needing some advice on what size brushless to stick in it, and any other pointers 4wd buggy folks could offer up! thinking a 10.5t but open to suggestions.
|
|
|
|
Post by chris01 on Nov 22, 2012 17:12:30 GMT -5
I have b44.1 with a 8.5 turn tekin setup and I like it
|
|
|
|
Post by aaronj on Nov 22, 2012 18:35:46 GMT -5
running a lipo as well?
|
|
|
|
Post by Billy D on Nov 22, 2012 19:58:32 GMT -5
I believe most are running the 6.5 in the 4x4 1/10 classes.
|
|
|
|
Post by aaronj on Nov 22, 2012 20:38:57 GMT -5
some of the reading I did recommended running a 8.5-10.5, but alot said the 8.5 is overkill, being Ive never driven on a track I dont need to overpower it. there is still a setup in the for sales at an attractive price, just need cash flow!
|
|
|
|
Post by bigrob21 on Nov 22, 2012 23:12:52 GMT -5
I used to run a 5.5 in my 4wd. I run a 8.5 for mod 2wd. With the new esc's you can make a 10.5 scoot with boost
|
|
|
|
Post by aaronj on Nov 22, 2012 23:58:12 GMT -5
when I got out of this last time brushless setups were just coming in, mainly the mambas, so the advances in the last 5-6yrs are beyond me, lmao. so whats this boost? lol
|
|
|
|
Post by chris01 on Nov 23, 2012 3:07:06 GMT -5
It automatically adds timing to give the motor more power basically.. U can set where u want it to start and end by the rpm.. I can do it on my tekin rs pro. I think it only works on sensored motors
|
|
|
|
Post by Captain Hoo Hah on Nov 24, 2012 13:03:05 GMT -5
8.5. Turn epa down to suit track. Bingo.
|
|
|
|
Post by bigrob21 on Nov 25, 2012 8:32:28 GMT -5
Chad xx4we is a 4wd. I would say o for a 6.5 atleast and turn it down if its too much.
|
|
|
|
Post by Dalew on Nov 25, 2012 12:48:25 GMT -5
I got a friend looking to get a 1/10th 4x4 buggy if anyone has one for sale.
|
|
|
|
Post by Billy D on Nov 25, 2012 14:52:27 GMT -5
Chad xx4we is a 4wd. I would say o for a 6.5 atleast and turn it down if its too much. + 1 You can also check with Martin Harrison, I believe he's getting ready to break out his old XX4WE also. He was talking about it to last night at the track, obviously its going to be Tekin products which are pretty good. ;D |
|
|
|
Post by Billy D on Nov 25, 2012 14:53:39 GMT -5
I got a friend looking to get a 1/10th 4x4 buggy if anyone has one for sale. Dale, check with Bubby Q. He has a old B44 for sale. Text me if you need his number. |
|
|
|
Post by aaronj on Nov 25, 2012 19:44:09 GMT -5
that suckers sharp too, all cf and blue aluminum, my dads considering getting that or the team durango 4wd buggy!
|
|
|
|
Post by aaronj on Dec 11, 2012 0:24:19 GMT -5
found some pro setup sheets over on oople.com under the losi forum if anyone else has one of these and looking for some starting points. They are in the sticky "Setups"
|
|
